Bi-Xenon Morimoto D2S Stage III
SKU:
$350.00
$320.00
$320.00
per item
Product DetailsRound Three: Based around the best performing Mini D2S projector to date, the Morimoto Mini D2S Stage III System features excellent performance at an accessible price.
Bi-Xenon Projectors: Are bound to change the game, yet again. Head to head with any OEM projector, the quality is spot on, but the Morimoto Mini D2S 4.0 is: 1) So much easier to retrofit with their extra long mounting shaft and 2) So much brighter. They actually failed to pass FMVSS108 testing only because the measured lux at certain points throughout their beam pattern exceeded the maximum allowed! With 4th generation Mini D2S optics powering across their curved cutoff shield and through the standard Kuria Optic clear lens, the Mini D2S 4.0 is a force to be reckoned with. Razor Sharp, unbeatable width, perfectly distributed gradient of light down to the foreground, and a high beam that’ll put some off road LED bars to shame.
Shrouds: Basically, they're the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
HID Ballasts: Morimoto’s XB Ballast are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in on place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Hardly are all aftermarket-HID ballasts the same, and the XB’s make that clear in most every category in our opinion.
D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB Bulb bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.
Bi-Xenon Projectors: Are bound to change the game, yet again. Head to head with any OEM projector, the quality is spot on, but the Morimoto Mini D2S 4.0 is: 1) So much easier to retrofit with their extra long mounting shaft and 2) So much brighter. They actually failed to pass FMVSS108 testing only because the measured lux at certain points throughout their beam pattern exceeded the maximum allowed! With 4th generation Mini D2S optics powering across their curved cutoff shield and through the standard Kuria Optic clear lens, the Mini D2S 4.0 is a force to be reckoned with. Razor Sharp, unbeatable width, perfectly distributed gradient of light down to the foreground, and a high beam that’ll put some off road LED bars to shame.
Shrouds: Basically, they're the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
HID Ballasts: Morimoto’s XB Ballast are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in on place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Hardly are all aftermarket-HID ballasts the same, and the XB’s make that clear in most every category in our opinion.
D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB Bulb bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.
